Super Fast dental Sintering Furnace For Zirconia

 

 

 

 

 

 

 

 

 

 

 

 

FAQ:

1. Can I use conventional zirconia discs in the ultra-fast sintering furnace? Or do I need special materials?
Yes, most high-quality zirconia discs (especially types 3Y, 4Y, and 5Y) are compatible, but ultra-fast sintering requires materials with good thermal shock resistance. It is recommended to use discs certified for fast/extra-fast sintering, as they are optimized for rapid temperature changes to avoid cracking or deformation.

2. Does fast sintering affect the translucency and strength of zirconia restorations?
When using pre-calibrated fast sintering curves, the translucency and strength are comparable to conventional sintering. However, poor temperature control or wrong material selection can result in under-sintered or brittle restorations. Therefore, the sintering furnace must be equipped with accurate multi-zone temperature sensors and matching sintering curves.

3. Does this furnace support overnight or long-cycle sintering?
Yes. Although it is optimized for fast cycles, it also supports standard or long sintering curves for larger bridges or special materials. You can switch sintering programs as needed depending on the complexity of the case.
4. Does ultra-fast sintering consume more energy?
Surprisingly, no. Despite the faster temperature ramp, the shorter total cycle means lower total energy consumption compared to a 6-8 hour sintering process. In addition, many models are equipped with smart energy-saving algorithms.
5. How often do I need to replace the heating elements in high-speed operation?
The life of the heating elements depends on the frequency of use and maintenance, but high-quality MoSi2 or SiC elements in fast furnaces are designed to last more than 1,000 times. Avoiding sudden opening of the furnace door and using suitable tray materials can significantly extend the life.

Hot Tags: sintering furnace ,dental lab furnace,cad cam lab ,dental lab furnace