Cad Cam Dental Clinic Sintering Oven furnace

 

1. Fast Sintering for Same-Day Chairside Restorations – Boost Clinical Productivity

This feature is a key competitive advantage for chairside equipment, addressing the long turnaround time (2–7 days) of traditional outsourced sintering.

Using imported high-purity MoSi₂ rods or specialized composite heating elements, combined with a high-efficiency ring transformer and an optimized thermal cycle system, the furnace achieves rapid heating rates (≥100°C/min). It precisely adapts to the sintering curves of zirconia and glass ceramics, optimizing the full heating–soaking–cooling process. Under ensured material density, a single crown can be sintered in around 1 hour, with a batch capacity of up to 10 units.

Benefits:

Enhanced patient experience: Patients can complete the entire workflow-scanning, milling, sintering, and final placement-in a single visit, improving satisfaction by over 90%.

Higher clinical throughput: Complete 8–10 sintering cycles per day, reducing reliance on outsourced services and eliminating logistics delays and communication costs.

Flexible handling of urgent cases: Immediate sintering for emergency restorations or rush orders increases the clinic's responsiveness and service capability.

2. ±1°C Precision Temperature Control & Uniform Thermal Field – Consistent Restoration Quality

Temperature precision is essential for final strength, translucency, and aesthetics-especially for clinics with "low-volume, high-quality" production.

Equipped with a PID intelligent control system and a high-precision Type-B thermocouple, the furnace continuously gathers chamber temperature data and adjusts heating power in real time, maintaining ±1°C accuracy. The chamber features a four-side surround heating design, high-density German insulation materials, and a segmented liner structure to eliminate cold spots. Temperature deviation at any point in the chamber is controlled within 3–5°C, ensuring uniform sintering.

Benefits:

Reliable mechanical strength: Post-sintering zirconia density >99.8%, flexural strength >1200 MPa, preventing cracks or insufficient strength caused by temperature fluctuations.

Stable esthetics: Uniform heating eliminates yellowing, gray spots, or color banding; translucency remains consistent (45–55% for zirconia), increasing first-try clinical fit by 80%.

Lower quality risks: Batch-to-batch performance deviation ≤5%, significantly reducing remakes and material waste.

3. Touchscreen Operation + Preset Programs + Power-Failure Memory – Easy, Safe, and Efficient

The system features a 7-inch HD touchscreen with a guided interface and comes preloaded with over 40 sintering programs covering zirconia crowns/bridges, glass-ceramic veneers, glazing cycles, and more-no need for manual parameter tuning.
The built-in power-failure memory module stores the real-time sintering stage, temperature, and system parameters; after power restoration, the cycle resumes seamlessly.

Benefits:

Low learning curve: Clinical staff can operate independently after 30 minutes of basic training-no need to hire additional technicians.

Safe operation: One-click start, visualized parameters, door-open power cut, and over-temperature alarms minimize safety risks such as accidental burns.

Uninterrupted production: Prevents incomplete or wasted sintering cycles due to power outages-especially critical for long cycles-ensuring timely delivery.

 

 

 

 

 

 

 

 

 

 

Hot Tags: Cad Cam Dental Clinic Sintering Oven furnace, China, suppliers, manufacturers, factory, customized