cad cam 5 axis dental milling machine for zirconia

 

The cad cam 5 axis dental milling machine for zirconia is controlled by a CNC system, which provides high efficiency, high precision and excellent grinding results. It is compatible with a variety of hard materials such as zirconium oxide and is suitable for dental laboratories, such as tooth restoration, reduction and cosmetic surgery. The machine has a rotary axis travel of ±360° on the A axis and a tool capacity of 14, supporting tools with a shank diameter of 4x56mm. It has a rated power of 650W and an impressive maximum XYZ operating speed of 4000mm/min on the Z axis and 6000mm/min on the XY axis. It also features an automatic tool magazine management system for automatic installation of milling drills, as well as high-precision multi-functional fixtures for zirconia blocks, PEEK, PMMA and wax.

 

 

 

 

 

 

1. The tool magazine is automatically hidden to prevent powder falling
Mechanical structure design: The tool magazine adopts a motor linkage mechanism. After receiving the "standby" signal, the tool magazine box body is quickly retracted into the machine body along the preset trajectory.

Powder falling isolation: After hiding, a closed space is formed, and cutting dust cannot enter the tool magazine, effectively preventing dust from contaminating the tool interface and tool changing mechanism, extending the tool life and reducing the failure rate.

Simplified maintenance: Reduced daily cleaning workload, maintenance personnel only need to clean in a special dust collection area without disassembling the tool magazine.

2. No calibration required: A axis ±360°, B axis +25°～–115°
Factory calibration: The machine tool spindle center and the positioning surfaces of each rotating shaft are calibrated once at the factory stage by high-precision measuring equipment. Users can start processing after unpacking without the need for tedious calibration steps.

High-precision zero-drift design: The use of integral shaft bearings and high-resolution grating scale feedback ensures that the A and B axes can be repeatedly positioned within ±3μm at any angle within a large travel range of ±360°/+25°~–115°.

Wide processing viewing angle:

The A axis has 360° full coverage, allowing the tool to feed from any direction;

The B axis has a 140° (25°–115°) pitch range, which can deeply process complex surfaces such as bridge positions and front teeth, completely eliminating dead angles.

One installation can complete the full-scale milling of multi-faceted and special-shaped bodies, eliminating multiple clamping/calibration, and improving processing efficiency and precision stability.

3. Remote/mobile control
Real-time monitoring: Built-in Ethernet module, through the dedicated APP interface, you can view the machine tool status (spindle speed, load, processing progress, tool status, etc.) in real time.

Remote alarm and intervention: When there is a risk of tool collision or program error, the system automatically pushes an alarm notification to the mobile phone or email, and the engineer can remotely pause/adjust the program to avoid downtime and waiting.
No need to copy with a USB flash drive, you can upload NC programs and download processing reports through the local area network, which greatly simplifies the production process.

4. Unique 100° blank fixture, saving 30% of materials
Innovation in fixture geometry: The fixture has a 100° inclined surface, which raises the disc-shaped blank and fixes it eccentrically. Compared with traditional horizontal fixtures, it allows the tool to be closer to the root surface of the workpiece.

Blank utilization:

Traditional horizontal fixture: A large edge margin must be reserved, and the blank diameter is usually ≥98 mm;

100° inclined fixture: The excess material can be concentrated on a single side that does not affect the processing, the blank diameter can be reduced to ≈85 mm, and the material consumption is reduced by ≈30%.

Processing stability: After tilting the clamp, the blank is more evenly stressed and has higher rigidity, which reduces vibration and helps improve surface quality.

 

 

 

Our factory has independent design, development and production capabilities. We are professional in the production and design of dental equipment. We have 15 years of production experience and can provide personalized customization. At present, it has been exported to more than 120 countries around the world. Our equipment is widely praised in the dental industry and is a dental grinding machine brand trusted by doctors and customers.

 

 

 

Hot Tags: cad cam 5 axis dental milling machine for zirconia, China, suppliers, manufacturers, factory, customized