Spindle Servo Motor Milling Machine 5 Axis Cnc Milling Machine For Dental Lab

 

Spindle Servo Motor Milling Machine 5 Axis Cnc Milling Machine has advanced spindle and servo motor technology, excellent processing performance and precision. The machine has a high-performance spindle (maximum speed: 6,000-60,000 RPM), providing stable power output, making the milling process faster and more accurate, and is suitable for a variety of dental materials such as zirconia blocks, wax blocks, PMMA and PEEK. The five-axis design allows milling at multiple angles (axis angle: A axis: ±360°; B axis: 25°-115°), enhancing processing flexibility and meeting the needs of complex crowns and restorations. The user-friendly interface simplifies the operation process and is easy to get started quickly.

 

 

The size of the milling material	98mm,98.5mm and the max thickness is 80mm
The max speed of XYZ axis	Z axis 4000mm/min XY axis 6000mm/min
The max speed of the spindle	6000-60000 rotation/min
The angle of the axis	Aaxis +-360°B axis :25-115°
The type of milling burs	Auto milling burs installation
The amount of milling burs	DiameterΦ 4*56mm
Controlling instruction set	NC code
Interface	USB 2.0.100M Internet access
Voltage	220V +-10%,50/60 Hertz
Power Consumption	Noise-pollution level
Noise-Pollution level	Standby model : under 45 decibel milling model: under 70 decibel The data was tested by UT353, the level of the noise varies when different material is used.
Install conditions	Indoor installation altitude below 2000m,temperature :5-40 degree Celsius
The size of the machine	470*560*650mm
Weight	90kg

 

 

1. Automatic hiding of tool magazine (powder-proof design)
Implementation mechanism
Real-time monitoring of processing status through sensors. When the spindle stops working for more than the set time (such as 30 seconds), the system triggers the servo motor to drive the tool magazine to slide into the closed cavity, and the hatch automatically closes. When the tool is changed, the built-in air curtain system (0.3MPa clean compressed air) forms an airflow barrier at the moment the hatch is opened to prevent external powder from penetrating.

Technical advantages
It can prevent cutting powder with a diameter of >5μm (such as zirconium oxide, PMMA debris) from entering the tool handle contact surface, reducing the risk of tool jamming by 90%.

2. Calibration-free technology
Core technology
Integrated 0.1μm 17-bit absolute encoders in the X/Y/Z axes, combined with A/C swing angle heads. The system uses embedded real-time compensation for thermal deformation (accuracy ±2μm/℃) and mechanical wear.

Operation process
Automatically perform a 15-second self-check after powering on: the spindle idling triggers the vibration sensor to calibrate the dynamic balance, and the probe scans the standard ball to achieve tool length/radius compensation.

3. Remote control function

Real-time monitoring: sampling 200+ parameters per second (including spindle load, temperature, vibration spectrum)

Remote programming: directly upload/modify G code or APT file generated by CAM

Early warning push: trigger SMS/email alarms through MQTT protocol (such as tool breakage detection)

Security protocol
Adopts AES-256 encrypted transmission, complies with IEC 62443 network security standard, and supports two-factor authentication.

4. 100° special-shaped fixture (material saving 30%)

Geometric optimization design
The fixture adopts asymmetric curved surface clamping jaws, generates a 100° support angle based on topology optimization algorithm, and adapts to common forms of dental restorations (crowns, bridges, implant guides). With the vacuum adsorption system and piezoelectric ceramic fine-tuning device, a positioning repeatability accuracy of 0.01mm is achieved.

Material utilization rate
Optimize the sample arrangement path to increase the utilization rate of 98mm diameter zirconia disc blanks from the traditional 70% to 93%. For example, only 0.8 cm³ of material is needed to process a single posterior crown (the traditional process requires 1.2 cm³), and the 5-axis linkage side milling technology is combined to reduce the finishing allowance.

 

 

 

 

 

 

 

 

 

Hot Tags: Spindle Servo Motor Milling Machine 5 Axis Cnc Milling Machine For Dental Lab, China, suppliers, manufacturers, factory, customized