Dental Lab equipment 5 axis CAD CAM Milling Machine

Dental Lab equipment 5 axis CAD CAM Milling Machine,which is a dry and high precision milling machine for dental lab and milling center. It can mill zirconia,wax,pmma,peek. The maximum speed of the Z axis of the XYZ axis can reach 4000 mm/min, the speed of the XY axis is 6000 mm/min, and the spindle speed range is 6000 to 60,000 RPM. The A axis provides a full 360° rotation, and the angle of the B axis can be adjusted from +25° to -115°, which is capable of multi-angle milling operations. The machine is equipped with an automatic tool changing system and uses milling tools with a diameter of 4 mm and a length of 56 mm. It uses NC code control and supports USB 2.0 and 100M network connection to ensure fast and efficient data transmission. The device uses 220V ±10%, 50/60Hz power supply and runs very quietly - the noise is less than 45 dB in standby mode and the noise is usually less than 70 dB when milling, depending on the material used. The machine is required to be installed indoors, the working environment temperature should be between 5 and 40°C, and the altitude should not exceed 2000 meters. It has a compact design (470mm wide x 560mm deep x 650mm high) and weighs 90 kg.