save Materials more than 30% 5 axis dental CAD CAM Milling Machine

 

5-Axis Dental CAD/CAM Milling Machine is a dry milling system for dental laboratories and chairside applications, used for crowns, bridges, implant restorations and orthodontic appliances.

Material Compatibility
Supports zirconia, PMMA/resin, wax, and PEEK materials, covering both temporary and permanent restoration workflows in digital dentistry.

Material Utilization

Optimized nesting and toolpath strategy reduces material waste by over 30% compared to conventional milling systems
Improved disc positioning and cutting logic help maximize usable restoration yield per 98 mm blank
Lower scrap rate directly reduces per-unit production cost in laboratory workflow

Milling Performance

Spindle speed: up to 60,000 RPM
High-speed dry cutting with stable torque output for hard and soft materials
Suitable for continuous milling of single units and multi-unit bridges

Accuracy & Processing

Supports fine margin milling for zirconia and resin restorations
Stable cutting control ensures smooth surface finish and reduced post-polishing workload

Application Scope

Dental laboratories
CAD/CAM milling centers
Chairside or near-chairside digital dentistry workflows

 

 

The angle of the axis	Aaxis +-360°B axis :25-115° X Axis：200mm Y Axis：110mm Z Axis：110mm
The type of milling burs	Auto milling burs installation
The amount of milling burs	DiameterΦ 4*56mm
Controlling instruction set	NC code
Interface	USB 2.0.100M Internet access
Voltage	220V +-10%,50/60 Hertz
Power Consumption	Noise-pollution level
Noise-Pollution level	Standby model : under 45 decibel milling model: under 70 decibel The data was tested by UT353, the level of the noise varies when different material is used.
Install conditions	Indoor installation altitude below 2000m,temperature :5-40 degree Celsius
The size of the machine	470*560*650mm
Weight	90kg

 

1.Automatic hidden tool magazine to prevent dust contamination
The tool magazine is designed to automatically retract into the machine body when not in use, reducing exposure to external dust.
During milling of materials such as zirconia and PMMA, fine powder is generated, which can easily affect tool condition and cutting stability in open structures.
2.No-calibration startup system
After power-on, the machine automatically performs precision detection and compensation, including tool position verification, machine zero-point alignment, and axis error correction, without manual calibration.
In practice, it reduces setup time by approximately 20%–40% and eliminates human alignment errors, ensuring stable and repeatable machining accuracy.
3.Remote control and real-time monitoring
The machine supports remote operation via network connection (Wi-Fi / LAN).
Users can monitor machining progress, spindle status, tool wear, and processing parameters from different workstations or remote locations, and adjust or pause operations when needed.
4.100° blank holder design for higher material utilization
The 100° inclined holding structure optimizes the clamping position of the disc, allowing more efficient use of the blank during milling.
For standard 98 mm zirconia and PMMA discs, material utilization can be increased by around 30%, reducing waste and lowering per-unit restoration cost.

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: save Materials more than 30% 5 axis dental CAD CAM Milling Machine, China, suppliers, manufacturers, factory, customized