Dental Teeth Making Machine 5 Axis Cad Cam Wet Milling Machine

 

The Dental Teeth Making Machine 5 Axis Cad Cam Wet Milling Machine is capable of milling materials such as 98PMMA, Premill abutments and glass ceramics.

This Dental Teeth Making Machine 5 Axis Cad Cam Wet Milling Machine has a power failure memory function, which can resume operation after power failure. It supports 90° vertical milling and can perform precise processing. The machine also supports automatic calibration, and the accuracy and stability of each operation improves work efficiency and processing quality.

 

 

 

 

 

When using Dental Teeth Making Machine 5 Axis Cad Cam Wet Milling Machine to process different materials, different processing precautions need to be taken:

1. Glass Ceramics
Processing precautions:
Cutting speed: Glass ceramic materials are relatively fragile and require lower cutting speeds to avoid fragmentation.
Coolant use: Wet milling requires sufficient coolant to help dissipate heat and reduce surface cracks.

2. Titanium Premill Abutment
Processing precautions:
Cutting force control: Titanium alloys have high hardness and high cutting force. Suitable tools (such as tungsten steel tools) must be used to adjust cutting parameters to avoid excessive tool wear.
Coolant use: Titanium alloys have poor thermal conductivity and require a large amount of coolant to prevent overheating.
Cutting speed: The cutting speed is slightly slower.

3. Polyetheretherketone (PEEK)
Processing precautions:
Cutting temperature: PEEK materials have good heat resistance. During processing, attention should be paid to the cutting temperature to avoid deformation caused by excessively high temperatures.
Tool selection: Use high-temperature resistant tools to reduce heat accumulation.
Coolant: Using wet processing helps maintain the stability of the material and avoid deformation caused by overheating.

4. Wax
Machining notes:
Cutting speed: Wax materials are softer and can be milled quickly at higher cutting speeds.
Cutting force: Wax is more likely to adhere to the tool during cutting, so the tool needs to be cleaned regularly.

5. PMMA (polymethyl methacrylate)
Machining notes:
Cutting speed: PMMA is softer and can be cut at higher speeds, but avoid cutting too fast to avoid cracks.
Cutting force: The cutting force should be properly controlled to avoid damage caused by excessive force.
Surface treatment: Pay attention to surface quality during processing. PMMA surfaces are prone to fine cracks and require smooth cutting.

 

 

 

 

 

 

 

 

Hot Tags: Dental Teeth Making Machine 5 Axis Cad Cam Wet Milling Machine, China, suppliers, manufacturers, factory, customized