5 axis dental Milling Machine For Zirconia Crown

The 5 axis dental Milling Machine For Zirconia Crown combines modern CNC technology with a user-friendly interface. The dry milling process does not require traditional water cooling, and the processing process is clean and efficient, avoiding the trouble of cleaning and maintenance. The 5 axis dental Milling Machine For Zirconia Crown can mill perfectly fitting crowns with micron-level accuracy (rotation range: A-axis: ±360°; B-axis: +25°-135°). The 5 axis dental Milling Machine For Zirconia Crown supports the processing of a variety of materials (PEEK, PMMA resin, wax, zirconium oxide blocks, etc.). The efficient processing speed (maximum spindle speed: 60,000 RPM/min) and optimized processing paths not only improve production efficiency, but also enable rapid response to market demand. The 5 axis dental Milling Machine For Zirconia Crown combines advanced technology with user experience, truly achieving a combination of high efficiency and high quality.

 

Products
Model	T20D
Axis	5
Milling mode	Dry
Milling type	Crown/coping,Bridge,
Max spindle speed	60000 RPM/min
Spindle power	500w
Spindle cooling	Air cooling
Rotation range	Aaxis: ± 360° Baxis：+25°-135°
Number of tool housed	12
Compatible compressed air	＞6pa(No oil and no water)
Loadable workpiece shape	Disk diameter: 98mm
Input Voltage	AC220V ±10%,50/60HZ
External dimensions	420*540*580mm
Weight	50kg only
Control command set	NC code
Brand	ZOTION
Factory Add	Chongqing,China

 

 

 

1. Innovative clamp design-material utilization rate increased by 30%
Due to uneven force and large margins on the corners, traditional clamps often need to leave a wide non-processing area around the zirconia semi-finished products; the "V-shaped + adjustable pressure plate" composite clamping structure of this machine can keep the blank close to the minimum edge area and evenly distribute the clamping force.
After the cutting path is optimized, the edge waste is reduced, and only 0.5 mm safety margin is required up and down and left and right of the blank (1.0 mm is common in the market).
For each batch of 10 crown materials, an average of 3 equivalent pieces of waste can be saved, which is equivalent to saving 30% of the material cost.
User benefits: The cost of raw materials is directly reduced, especially for dental laboratories with mass production, the average annual material expenditure can save tens of thousands of RMB.
2. Breakpoint resume carving function - work efficiency increased by 80%
Process principle: The machine control system writes NVRAM (non-volatile storage) in real time after each cutting step is completed, recording the current tool position, cutting parameters and completed contour.
In case of sudden power outage or program abnormality, the machine automatically reads the last breakpoint after restarting, without manual re-centering and tool setting.
Resuming processing starts from the interrupted cutting layer to avoid the time waste caused by "re-milling".
If a complete processing takes 20 minutes, breakpoint resume carving can avoid re-milling 16 minutes of invalid cutting (80%), saving an average of 12–14 minutes per piece.
In mass production, the equipment utilization rate is greatly improved, and the delivery date is more predictable.
3. 850W high-power spindle - high speed and high precision
The high-power spindle provides greater cutting torque, which can stably cut into hard zirconia at high speed, reducing vibration and tool radial runout.
The cutting speed is increased by more than 20%, and the average time for processing a full crown is shortened from 8 min to less than 6 min.
The surface roughness can reach Ra < 0.6 μm, which meets the needs of one-time molding or minimum post-processing. .
Tool life is extended: small vibration, stable cutting, and tool loss is reduced by about 15%.
4. Clamp + automatic tool change magazine integration-more economical in space and operation and maintenance
The tool change arm and clamping assembly are integrated into the same active module, eliminating the space for independent tool magazines and independent fixture racks.
The machine floor area is reduced from the traditional 1.2 m² to 0.8 m², and the laboratory table or floor space is released by 33%.
During maintenance, only the same side panel needs to be opened to inspect the clamping and tool change mechanism, without multiple disassembly and assembly.
The maintenance cost and maintenance time are reduced by about 25%, and the overall cost of ownership (TCO) of the equipment is reduced.

 

 

 

 

 

If you're interested in this dental milling machine and would like to know its price and additional details, feel free to contact us!

 

 

 

 

 

 

 

 

Hot Tags: 5 axis dental Milling Machine For Zirconia Crown, China, suppliers, manufacturers, factory, customized