Dental Ultra Fast Heating Zirconia dental Sintering Furnace

 

Dental Ultra Fast Heating Zirconia dental Sintering Furnace can complete high-quality zirconia sintering in a short time.

Dental Ultra Fast Heating Zirconia dental Sintering Furnace is suitable for the production of zirconia dense firing, sintering, glazing and various sintering materials.

 

 

 

 

 

1. Intelligent safety protection system (Digital Power + multiple safety devices)

The electronic control system has automatic protection mechanisms such as overcurrent, short circuit, and overtemperature to prevent danger caused by abnormal operation or component failure.
Once an abnormality is detected (such as the furnace door is not closed properly, the voltage is unstable), the system will immediately stop running and alarm.

2. The maximum sintering temperature can reach 1650℃, and the furnace volume is up to 1 liter

The use of high-performance refractory materials and temperature control system can stably reach a high temperature of 1650℃.

The 1-liter volume can accommodate multiple units of zirconia restorations at the same time, which is suitable for daily clinical and laboratory multi-unit production.

3. Ceramic crystal fiber lining, super thermal insulation performance

The internal use of high-purity ceramic crystal fiber can significantly reduce heat loss.

Good thermal insulation performance can save energy and extend the life of components.

4. High-grade molybdenum disilicide heating element (MoSi₂), pollution-free sintering
MoSi₂ heating element has a wide operating temperature range, strong oxidation resistance and corrosion resistance.
No impurities will be released during the sintering process to avoid contamination of zirconia materials.

5. Double-layer stainless steel shell + surround heating design, better temperature uniformity

The double-layer shell is scalding-proof and more stable, reducing the conduction of heat energy to the outside.
The surround heating design keeps the temperature difference around the furnace within ±1°C.

6. Linear screw guide drive workbench, high precision and low failure rate

Compared with traditional belt or chain drive, screw guide has the advantages of high precision and smooth operation.

Small mechanical friction and more durable for long-term operation.

7. One-button start, intelligent operation

The operation panel is simple in design and supports "one-button run" preset program.

Users only need to select the material type to start full-process automatic sintering.

8. Fast cooling + intelligent cooling curve

The system automatically executes the cooling curve according to the settings to avoid sudden cooling and damage to the material.

Forced air cooling is combined with program control to shorten the cooling time.

9. Compatible with all mainstream brands of zirconia blocks on the market

Supports a variety of sintering programs, including HT, ST, UT, 3Y/4Y/5Y and other zirconia materials.

The furnace rack and tray sizes are universal and suitable for 98mm standard round wafers.

10. Pre-drying function + automatic lifting platform + automatic shutdown after program completion

After starting the program, the workbench automatically rises to the drying position to remove free water first.

After sintering is completed, it automatically cools down and shuts down, saving manual intervention.

Built-in electronic voltage regulator, no additional configuration is required in areas with unstable voltage.

11. Full process monitoring and recording system + automatic protection system

With full process temperature, current, voltage, and operating status recording and export functions.

Can be used for sintering result analysis and trace quality problems.

The system automatically prevents overcurrent, short circuit, and overtemperature to avoid equipment damage.

 

 

 

Hot Tags: sintering furnace，dental lab，cad cam，sintering oven