Preparation Process Of Full-ceramiczirconium Oxide Teeth

For patients with tooth defects, porcelain teeth must be the most familiar method of tooth repair, but since porcelain is composed of a metal base layer and an outer porcelain layer, the color have big different with real teeth. In the middle of the teeth, it seems to be "obscured", and the porcelain teeth are becoming unable to meet the needs of the public. The full-ceramic zirconiatooth perfectly compensates for this defect of the porcelain tooth.

However, many patients are not very familiar with new methods of dental restoration, and they are worried that there will be problems such as immature technology. In fact, the process and method of dental repair of full-ceramic zirconia teeth and porcelain teeth are the same.

Preparation process of full-ceramiczirconium oxide teeth

At the time of production, the doctor will recommend taking the good teeth on both sides of the missing teeth as abutment and grinding about 1/3 of the tooth tissue. However, the full-ceramic zirconia teeth are more than the tooth-toothed tissues of the porcelain teeth. Less, and no pain.

1. If the tooth is required to be repaired with full-ceramic zirconia teeth due to color or morphological defects, the tooth itself is in good condition. Usually, the teeth are prepared under local anesthesia at the first visit, and the model and colorimetric are prepared. The dentist and the patient jointly select the appropriate tooth color and make a temporary crown according to the situation.

2. If the tooth is damaged or the tooth is missing, and the tooth nerve has not been involved, the tooth filling is required first. If the filling is far away from the tooth nerve, the tooth body can be prepared immediately after the filling is completed; If the filling is closer to the nerve, it may take a while to observe the situation and increase the number of visits.

3, if the tooth has a large area of smashing, tooth defect, has affected the tooth nerve or root canal lesions, need to be treated with perfect pulp or apical period, after the observation is stable, the porcelain crown can be repaired. If a patient with a post crown is needed, the number of visits will increase accordingly.

4. Colorimetric, in order to ensure that the porcelain teeth produced are similar color to the original teeth or adjacent teeth, the doctor must compare the color of the original teeth with the color palette and determine the approximate hue range on the color palette to avoid full-ceramic teeth. Inconsistent with natural tooth color.

5, the second checking is about 2 to 3 weeks later, the specific time is determined by the time required to process the manufacture of all-ceramiczirconia teeth, try to wear the crown first, if all aspects are satisfactory, such as tightness, occlusion Relationships, colors, etc., it can permanently fix dentures.

Through the introduction, it is found that making a full-ceramiczirconium oxide tooth is actually a very simple process. You only need a few simple steps to give you a healthy and clean tooth.